MAKINO-Shanghai Kunyi Machinery Hardware Co., Ltd

S MAKINO-Shanghai Kunyi Machinery Hardware Co., Ltd

MAKINO

SEEDTEC

Nakamura-Tome

Replacing the filter element
2023-10-19
Filter and separate the solution, remove impurities with oilFailure to replace in a timely manner can cause machine tool alarms

C-axis maintenance
2023-10-19
The C-axis accuracy is out of tolerance.Adjust the straightness and verticality of the C-axisAdjusting the concentricity of the C-axisSet the origin switch for the C-axis

Repair handle
2023-10-19
The control handle signal is interrupted.Replace the FPB connection wire of the handle

Spindle maintenance
2023-10-19
Replace bearings, grind tapered holes, adjust tension, and replace shrapnel

Overhaul and maintenance of discharge motor
2023-10-19
Check and adjust the horizontal distortion of the machine toolCheck the air pressure and control unitCheck the oil pressure and control unitCheck the processing fluid levelCheck the lifting ...

Processing center alarm processing
2023-10-19
Processing center alarm processing

Installation and debugging of machining center
2023-10-19
Debugging level, power on, checking three-axis accuracy, installing various accessories

Discharging motor alarm processing
2023-10-19
Discharging motor alarm processing

Installation and debugging of discharge motor
2023-10-19
New machine installation or old machine relocationDebugging level, power on, checking three-axis accuracy, installing various accessories

Repair oil cooler
2023-10-19
Abnormal oil cooler, oil cooler not workingCompressor copper pipe leakageAdd refrigerant again and replace the copper pipe

«

1

2

»

Makino Machine Horizontal 4‑Axis Horizontal 5-Axis Vertical 3-Axis Vertical 5-Axis Graphite Machining Wire EDM Sinker EDM EDM Hole Drilling

Seedtec Machine Manual surface grinder Semi-Auto surface grinder Full auto, 1 axis servo Full auto, 2/3 axis servo Mirror surface grinder Column moving, 1/2 axis servo Ram type surface grinder Saddle type surface grinder

Nakamura-Tome Machine Knife tower crane Double turret dual spindle (TW) ATC composite processing machine Multi blade tower and rotating B-axis Double turret dual spindle (WY) Dual turret dual spindle (WT)

Service Support Common accessories Repair Cases Maintenance contract Daily advice

About Us Company Profile Development history Honor display

Kunyi Machinery

Focusing on providing fully automated solutions for the field of mold machining.

Copyright © 2022 Shanghai Kunyi Machinery Hardware Co., Ltd.

Home

Makino Machine

Horizontal 4‑Axis

Horizontal 5-Axis

Vertical 3-Axis

Vertical 5-Axis

Graphite Machining

Wire EDM

Sinker EDM

EDM Hole Drilling

Seedtec Machine

Manual surface grinder

Semi-Auto surface grinder

Full auto, 1 axis servo

Full auto, 2/3 axis servo

Mirror surface grinder

Column moving, 1/2 axis servo

Ram type surface grinder

Saddle type surface grinder

Serein Inspection Equipment

Knife tower crane

Double turret dual spindle (TW)

ATC composite processing machine

Multi blade tower and rotating B-axis

Double turret dual spindle (WY)

Dual turret dual spindle (WT)

Service Support

Common accessories

Repair Cases

Maintenance contract

Daily advice

About Us

Company Profile

Development history

Honor display

News

Contact

CHINESE