Check level (static, dynamic)
Check the verticality of XY, XZ, YZ
Check the runout of the spindle busbar
Check the functions of tool change and water spraying
Clean up waste grease and iron filings
Check the air pressure and drain the water from the pressure pump
Check if the spindle oil and spindle filter element need to be cleaned or replaced
Check if the bearing oil cooler needs refueling
Check if hydraulic oil needs to be added to the hydraulic station
Check if the hard rail grease needs to be replaced and refueled
Clean the oil cooler filter screen, fan screen, etc
Clean the dust inside the electrical box
